Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Keeping optical sensors clean on mooring lines in Australian waters

Deploying an optical sensor on a mooring line looks straightforward until the data starts drifting. Biofilms, algae, barnacles, and drifting weed shorten the line. Currents push water past the optics in unpredictable patterns, and a sensor that worked perfectly on the bench loses calibration within days. In places like Moreton Bay, Sydney Harbour, and the warm passages of the Great Barrier Reef, biofouling can turn a clean lens into a green smear in less than a week, while strong tidal flows around Bass Strait or the rip heads off Port Phillip Bay create their own measurement problems.

Australian monitoring programs, whether run by state environment agencies, port authorities, or university research groups, often rely on long-term moorings to capture seasonal patterns. The data has to be defensible, so the optics have to stay clean and the housing has to sit in the water in a way that lets the instrument see what it is meant to see. A few careful choices at the mounting stage make the difference between a season of reliable readings and a season of constant site visits.

The biofouling challenge in Australian coastal waters

Biofouling in Australian waters moves fast. The southern coastline, from Jervis Bay to the Tamar Estuary in Tasmania, sees cooler winter temperatures that slow growth, but summer brings a rapid bloom of algae, tunicates, and small barnacles. Up north, in places like Cairns Inlet or Darwin Harbour, water temperatures stay warm year-round and biofilm formation can begin within forty-eight hours of deployment. Coastal research run through CSIRO and the Integrated Marine Observing System has documented how quickly marine growth colonises submerged hardware, and the same pressures apply to optical windows.

Soft algae and biofilms scatter light across a wide range of wavelengths and can mimic the optical signature of fine sediment, skewing turbidity readings toward artificially high values. Hard fouling, such as barnacles and tubeworm matrices, casts shadows and creates uneven patches on the optical face, producing noisy backscatter signals. Brisbane River operators rotate sensors more often than those on the colder southern coast, and some tropical programs schedule weekly cleaning dives. Prevention at the mounting stage is cheaper and more reliable than correction after the fact.

Picking the right spot on the mooring line

Where the sensor sits shapes both biofouling exposure and optical measurement quality. A position too close to the surface invites UV exposure, wave slam, and floating debris, while a position resting on the seabed invites sediment smothering and crab damage. Most Australian operators settle on a mid-depth placement that keeps the sensor below the photic zone but above the benthic boundary layer, typically one to three metres above the bottom for shallow estuarine work.

The other placement variable is horizontal offset. Sensors clamped directly against the mooring line suffer from a known shadowing effect, where the line itself blocks a portion of the ambient light field and distorts the backscatter measurement. Mounting the sensor on a short outrigger arm, between 200 and 400 millimetres from the line, removes that shadow and lets the optical path see a more representative volume of water. This small change also reduces the surface area available for fouling colonisation right at the lens face, since growth concentrates on the line hardware first.

Currents matter too. A sensor parked in a known eddy reads differently from one in the main flow, and the flow itself influences how quickly fouling accumulates. Sluggish harbour corners collect more biofilm because particles settle out and provide a nutrient base, while high-flow sites stay cleaner mechanically but may exceed the sensor's flow tolerance. Operators near Botany Bay log current profiles alongside the optical data so flow artefacts can be filtered out later. Field-tested guidance on positioning is available through the applications overview on the manufacturer site.

Sensor orientation and optical path geometry

The way the sensor faces the water changes how it behaves in flow. Optical backscatter sensors read best when the optical axis points straight down or at a slight downward angle, away from direct sunlight and surface reflection. A downward-facing arrangement also shelters the optical window from settling debris and reduces the chance of a stray fish or piece of weed momentarily blocking the lens.

Angle of attack relative to the prevailing current is the next consideration. A sensor mounted square to the flow will experience more drag, more vibration, and more turbulent noise in the optical signal than one aligned with the flow. Most Australian mooring designs adopt a streamlined clamp or a fin that aligns the housing with the dominant current direction, identified from local tide tables or short-term current meter deployments. The result is a quieter signal, less mechanical stress on the cable termination, and a more stable fouling pattern around the lens.

The optical path itself should be checked after mounting. Many operators run a quick bench test with the sensor powered up before deployment, confirming that the reading responds to a known turbidity standard and that no part of the housing, clamp, or cable is intruding into the measurement volume. This step catches geometry problems while the sensor is still on the boat deck, when they are trivial to fix.

Anti-fouling strategies and coatings

Anti-fouling paints and copper-based treatments are a common line of defence, but they need to be chosen with care around optical windows. Some marine-grade coatings contain metallic pigments that can interfere with optical readings if the coating migrates onto the lens surface. The safest approach is to mask the optical face during application and to use a coating rated for the expected deployment duration.

Biocide release systems, including slow-release copper collars and tributyltin-free treatments now standard in Australian waters, can extend the interval between cleanings by several weeks. These work best when paired with regular mechanical wiping, since chemical treatments slow growth rather than eliminating it. A coating that lasts ninety days in the cooler waters of Western Port may only last thirty in the warm shallow reaches of the Fitzroy River, so coating choice should be matched to the deployment site rather than selected on a generic basis.

A few preparation steps before deployment are worth listing, since they tend to get rushed on busy launch days.

Wipers, shutters, and mechanical cleaning

Mechanical wipers remain the most reliable way to keep an optical sensor window clean over long deployments. Wiper designs range from simple rotating brushes to motorised silicone blades that pass across the lens on a programmed schedule. The choice depends on deployment duration, expected fouling pressure, and the operator's ability to intervene if the wiper fails.

Programmed wiping intervals should reflect the local fouling rate. A daily wipe is overkill in a cold southern estuary during winter, but it is barely adequate on a tropical reef flat during a summer bloom. Many operators move from hourly wipes during the first week of deployment to longer intervals once a steady-state fouling pattern emerges. The wiper itself should be inspected at every service visit, since a worn blade can scratch the optical window and permanently alter the sensor's calibration.

Shuttered housings offer a complementary approach. By retracting the optics behind a protective barrier between measurements, the sensor reduces the time the window spends exposed to biofouling and sunlight, at the cost of higher power draw. For sites with reliable power, such as near-port installations around Fremantle or Newcastle, shutters have proven effective at extending cleaning intervals to several weeks. Common wiper and coating questions are answered in the news and FAQ section, kept current with field feedback.

Mooring hardware, cable routing, and biofouling-aware rigging

The hardware that holds the sensor in place influences biofouling as much as the sensor housing itself. Galvanised shackles, cheap cable ties, and rough nylon rope all provide irregular surfaces that biofilm and algae latch onto more readily than smooth stainless steel or purpose-made mooring hardware. Australian marine suppliers stock a range of antifouling-friendly fittings, and the modest extra cost pays back in cleaner data and easier recovery at the end of the deployment.

Cable routing deserves the same care. A cable flapping in the current creates a steady wake that disturbs the optical measurement and accelerates biofouling by constantly moving the cable through the water column. Securing the cable tightly along the mooring line with UV-resistant cable ties, and leaving a service loop near the sensor so the housing can be lifted for inspection without disturbing the rest of the rig, is standard practice. Where the cable crosses a shackle or termination, additional chafe protection prevents the slow wear that eventually exposes conductors to seawater.

The mooring line itself can be a biofouling reservoir. Steel wire accumulates growth that periodically sloughs off in sheets, sending clouds of material past the sensor. Plastic-jacketed wire or synthetic rope reduces this shedding, and some operators sheath the upper section of the line in a smooth sleeve to keep growth from establishing in the first place. Each of these choices contributes to a quieter, cleaner optical signal over the full deployment window.

Field checks, calibration, and reading the data

Even a well-mounted sensor needs a regular check-up. Pre-deployment calibration against a Formazin turbidity standard sets the baseline, and a post-deployment check on recovery confirms whether the optics drifted during the deployment. Operators working through state environment agencies often align these calibration points with laboratory reference samples run on split water collected at the same site, which lets them tie field readings to a known standard with traceable uncertainty.

The data itself reveals biofouling long before a diver or service visit confirms it. A gradual upward drift in baseline turbidity, especially during slack-water periods when the true reading should be at its cleanest, is a classic early warning that biofilm is forming on the lens. Step changes in the signal, particularly when they correlate with the lunar tidal cycle rather than with any real environmental event, point to flow interference from a settling mass of fouling on a nearby line component. Logging these patterns lets the program manager schedule cleaning before the data becomes unusable.

The following patterns often point to biofouling or flow interference rather than real water-quality change.

For programs where the optical data feeds into a broader monitoring picture, such as dredging plume tracking or defence-related harbour surveillance, the integrity of the moored readings directly shapes downstream decisions. A recent turbidity monitoring piece explores how clean optical data supports detection of underwater disturbances in defence settings.