Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Using Optical Backscatter to Track Feed in Larval Aquaculture Tanks

In larval aquaculture, feed availability can change within minutes. Rotifers, Artemia nauplii, copepods, microalgae and formulated microdiets move through the water column, settle on tank surfaces or become unavailable to small fish and crustaceans. An optical backscatter sensor can provide a continuous indication of suspended material, helping hatchery staff see how much particulate feed remains in the water between manual checks.

The signal is not a direct measurement of nutritional value or larval ingestion. It is a measurement of light scattered back from particles. Used with feeding records, microscopy, larval behaviour and water-quality data, optical backscatter can become a practical process-control tool. This is especially useful in Australian hatcheries working with barramundi, prawns, mulloway, snapper and other species in warm-water tanks, flow-through systems or recirculating aquaculture systems.

Why Feed Clouds Matter in Larval Tanks

Larvae have small mouths, limited swimming strength and feeding behaviours that develop rapidly. A feed dose that appears generous to an operator may disperse unevenly, sink beyond the feeding zone or be consumed quickly by the most active larvae. If the dose is too low, weaker individuals may miss feeding opportunities. If it is too high, uneaten particles can raise organic loading, encourage bacterial activity and increase oxygen demand.

The useful question is therefore not simply whether feed was added. Hatchery managers need to know how long a suitable concentration remains available, whether the feed is distributed across the tank and how quickly the feeding cloud disappears. In a larval rearing tank, turbidity can act as a time-dependent indicator of particulate availability, provided that feed particles are the main source of suspended solids during the measurement period.

This matters in Australian production settings where water temperature can accelerate metabolism and microbial processes. A barramundi hatchery near Darwin or Cairns may have different feeding and water-exchange patterns from a cooler facility supplying juvenile fish around Adelaide or southern New South Wales. Prawn hatcheries in Queensland may also manage fine feed particles differently from finfish operations because tank geometry, stocking density and water movement vary substantially.

How Optical Backscatter Represents Suspended Feed

An optical backscatter sensor sends light into the water and measures the portion scattered back by particles. The returned intensity generally rises when more material is suspended, creating a useful proxy for turbidity, suspended solids or feed concentration. The relationship depends on particle size, colour, shape, refractive properties and the wavelength and geometry of the instrument.

Rotifers, Artemia, crushed pellets, microalgae and organic flocs produce different optical responses. Two tanks with the same mass of suspended material can therefore produce different readings. Even the same feed can generate a changing signal as it hydrates, breaks apart, becomes colonised by microorganisms or is consumed. For this reason, a generic turbidity conversion should not be treated as a universal feed-concentration measurement.

A better approach is to establish a site-specific relationship. Collect tank samples at known times after feeding, measure the sensor response, and compare those readings with a suitable laboratory or bench method. Depending on the feed, this may involve particle counts, dry mass, microscopy, image analysis or a carefully standardised gravimetric procedure. The aim is to learn what a stable, declining or excessive backscatter trace means in that particular tank.

Sensor selection also matters. A compact optical turbidity or suspended-solids instrument may suit a research tank, while an OEM integrator may require a different housing, connector, output protocol or cleaning arrangement. D & A Instruments’ aquaculture applications provide useful context for considering optical monitoring across marine and freshwater environments.

Designing A Reliable Monitoring Point

The sensor should be positioned where it samples the feeding zone without being directly struck by a concentrated stream of feed. A point near the centre of a circular tank may be representative when mixing is even, while a side-wall location may be preferable where aeration creates a predictable circulation pattern. The correct position should be tested with visual observations, dye trials or several temporary sampling points.

Avoid placing the optical window beside an air diffuser, drain, inlet jet or scraper. Bubbles can scatter light strongly and create spikes that resemble sudden increases in feed. A sensor mounted too close to the bottom may detect settled material during disturbance, while one installed too high may miss particles circulating below the surface. In shallow larval tanks, the mounting bracket should also prevent larvae, screens or cleaning equipment from contacting the instrument.

Hydraulic conditions should be recorded alongside the optical signal. Pump cycles, water exchange, aeration rate, tank cleaning and feeding method can each alter particle residence time. A hatchery in Port Stephens, for example, may operate seawater exchange patterns that differ from a closed RAS facility in Melbourne, where filtration and biofilter activity influence the movement and removal of feed particles.

Regular cleaning is essential because biofilm, mineral deposits and organic coatings can reduce or distort the signal. The maintenance interval should reflect the water source, feed type and stocking density rather than a fixed calendar rule. In marine systems, salt deposits and fine organic films may develop differently from freshwater fouling. A simple inspection schedule, paired with a clean-water reference check, helps separate genuine changes in feed availability from sensor drift.

Interpreting The Feeding Signal

A typical feeding event may appear as a sharp rise in optical backscatter followed by a gradual decline. The initial rise indicates particle dispersion, while the decline may reflect consumption, settling, dilution, filtration or particle breakdown. The most valuable information is often the duration of the elevated signal and the shape of the decay curve, rather than the peak alone.

A rapid fall can mean that larvae consumed the feed efficiently, but it can also indicate poor distribution or fast removal through the outlet. A prolonged high reading may indicate overfeeding, weak larval uptake, excessive feed size or insufficient circulation. Interpretation should therefore combine the signal with larval gut fullness, swimming behaviour, survival, dissolved oxygen, ammonia and observations of uneaten material.

Data analysis can be as simple as calculating the time for the signal to return to a baseline band. More advanced systems can compare the area under the curve between feed events, identify abnormal peaks and trigger an operator alert when feed remains suspended beyond a defined period. The baseline should be established for each tank because natural turbidity, algae and background suspended solids may differ.

Guidance on reading a turbidity trace can also be informed by broader monitoring practice. For example, this explanation of turbidity data interpretation concerns dredging rather than hatchery feeding, but its principles about baseline shifts, transient peaks and changing particle conditions are relevant when assessing optical records.

Signals That Need A Second Check

These patterns should prompt a physical observation before the feeding programme is changed. A quick sample under a microscope can reveal whether the particles are intact feed, faecal material, algae or floc. Comparing the optical record with tank photographs and manual sample results creates a more defensible interpretation than relying on a single sensor value.

Turning Measurements Into Hatchery Decisions

Optical backscatter becomes most useful when it supports a defined feeding protocol. Operators can record the starting signal, the time of feeding, the signal peak, the time to baseline and the amount of feed supplied. Over several cycles, these records can reveal whether a particular larval stage requires smaller, more frequent doses or whether circulation changes are improving particle distribution.

The approach can support adaptive feeding without replacing husbandry expertise. For instance, a hatchery might set a minimum availability period for Artemia and investigate any feeding event that disappears unusually quickly. It might also use an upper persistence limit for formulated microfeed, prompting a review of dose, particle size or tank exchange when the signal stays elevated.

Integration with a programmable controller, logger or supervisory system allows sensor readings to be aligned with pumps, valves and feeders. In an Australian commercial facility, records may also support traceability across production batches and help staff working different shifts apply the same decision rules. The system should retain raw data and event times so that a feed response can be reviewed after a mortality event or a change in water treatment.

Practical Checks For Daily Use

The sensor should be calibrated and verified with material that resembles the actual feed environment. A clean-water check can identify fouling, while a prepared suspension or repeated feed addition can test repeatability. Calibration samples should cover the concentration range encountered during ordinary feeding rather than focusing only on clear water and a very high standard.

There are also biological limits to automation. Optical backscatter cannot show whether particles contain the right nutrients, whether larvae have successfully ingested them or whether a pathogen is affecting appetite. It cannot distinguish all particle types without additional sensing or sampling. The strongest monitoring programme combines optical data with routine microscopy, larval growth measurements, dissolved oxygen checks and experienced observation.

For Australian operators, environmental conditions outside the tank can affect interpretation too. Seasonal seawater changes, heavy rainfall near coastal hatcheries, bore-water chemistry and local algal conditions may alter background turbidity. Facilities supplying regional markets, including hatcheries servicing Queensland prawn farms or barramundi production around northern Australia, benefit from recording these conditions as part of the sensor baseline.

When implemented carefully, optical backscatter offers a continuous view of feed-particle behaviour that manual snapshots cannot provide. It can show when a feeding cloud forms, how evenly it moves through the tank and how long particles remain available. With site-specific calibration and biological checks, that information supports more consistent larval nutrition, cleaner water management and better control of hatchery production.