Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Turbidity Monitoring Strategies for Combined Sewer Overflow Detection

Combined sewer overflows (CSOs) occur when a shared pipe network carries more stormwater and wastewater than a treatment plant or collection system can manage. The excess flow is then discharged to a receiving stream, river, lake, or coastal area. These events can release elevated concentrations of suspended solids, organic matter, nutrients, pathogens, and other pollutants.

Turbidity monitoring provides a practical way to detect and characterize these discharges. Optical sensors can identify rapid changes in water clarity, support automated alarms, and produce a continuous record when direct sampling is impractical. Used correctly, turbidity data helps utilities establish when an overflow begins, how long it lasts, and how strongly it affects the receiving water.

A reliable strategy requires more than placing a nephelometer in a channel. Sensor location, hydraulic conditions, fouling control, calibration, telemetry, and data interpretation all influence the quality of the result. Turbidity should also be treated as a response indicator rather than a complete substitute for laboratory analysis of suspended solids or microbial contamination.

Why Turbidity Matters During Overflow Events

CSO discharges often create a distinct optical signature. Runoff can scour sediment from streets, catch basins, and sewer lines, while wastewater adds fine organic and inorganic particles. This mixture commonly produces a sharp increase in turbidity compared with dry-weather background conditions. The timing and magnitude of that increase can provide evidence that an overflow has occurred.

The signal is especially useful when paired with rainfall and level measurements. Rainfall intensity can indicate the likelihood of a surcharge, while water level or flow data can show whether a structure is approaching its overflow condition. Turbidity then adds information about the material moving through the system or entering the receiving water.

Still, high turbidity does not prove that a discharge is a CSO. Streambed disturbance, construction, bank erosion, dredging, algal particles, and stormwater without wastewater influence can produce similar readings. Monitoring programs should therefore define the local baseline and combine optical measurements with site context, operational records, and periodic confirmatory samples.

Build A Site-Specific Monitoring Design

The first decision is where to measure. A sensor may be installed upstream of an overflow structure to observe conditions within the collection system, at the outfall to document discharge behavior, or downstream in the receiving water to measure environmental response. Each position answers a different question and has different installation risks.

An outfall location usually provides the clearest evidence of an actual release, but access can be difficult during storms. The sensor may face rapidly changing depth, entrained air, floating debris, and strong turbulence. A downstream station is often easier to maintain and can support impact assessment, although dilution and upstream sources may make the signal less specific.

A paired design can be particularly valuable. An upstream reference station establishes background conditions, while a downstream or outfall station captures the event response. Comparing the two records helps distinguish a local overflow from a regional storm-driven increase in suspended sediment. When budgets are limited, a carefully selected outfall station combined with rainfall and level data can still provide useful event detection.

Hydraulic conditions should be examined before installation. Avoid placing the optical path directly beside a wall, in a stagnant pocket, or where sediment accumulates. At the same time, excessive turbulence can introduce bubbles that scatter light and create false peaks. The mounting system should hold the sensing area at a stable depth while allowing safe retrieval for cleaning and verification.

Choose Optical Sensors For Real Conditions

Nephelometric sensors estimate turbidity by measuring light scattered by particles, commonly at a defined angle. Suspended-solids instruments may use related optical methods and can be configured for higher concentrations found in sewer flows, dredging areas, or sediment-rich runoff. The appropriate range depends on expected conditions rather than on a general water-quality specification.

Particle size, color, shape, and composition affect the relationship between turbidity and suspended solids. A sensor calibrated in clear river water may not produce an accurate solids estimate in a wastewater-dominated flow. For this reason, turbidity is often reported in instrument-specific or standardized turbidity units, while a site-specific correlation is developed if the program needs an estimated total suspended solids value.

Sensor selection should account for optical path geometry, operating depth, temperature range, cable length, power demand, and communications requirements. Wipers or mechanical cleaning systems can reduce biological growth and sediment accumulation, but they add moving parts and require inspection. Air blasts, copper components, anti-fouling coatings, and scheduled manual cleaning may also be appropriate depending on the site.

The verification process is as important as the initial installation. A field team should document the sensor condition, compare readings with a suitable standard or reference instrument, and collect water samples when a solids correlation is required. Detailed guidance on nephelometer calibration procedures can help establish a repeatable approach for field-deployed optical equipment.

Monitoring approach Primary purpose Main advantages Common limitations Useful companion data
In-pipe or upstream monitoring Detect surcharge conditions and particle movement before discharge Protected installation and direct view of sewer hydraulics Access, confined-space hazards, coating and debris Level, flow, rainfall
Overflow outfall monitoring Confirm and characterize an actual release Strong event specificity and direct compliance value Variable depth, turbulence, floating debris, difficult storm access Rainfall, gate status, level
Downstream receiving-water monitoring Measure environmental response Shows plume movement and persistence Dilution and other upstream sources can obscure the signal Upstream reference, conductivity, flow
Portable event sampling Investigate short-term or uncertain conditions Flexible placement and useful for reconnaissance Limited temporal coverage and labor-intensive deployment Grab samples, visual observations
Continuous fixed station Build a long-term event record Enables automated alerts, trend analysis, and duration estimates Requires power, telemetry, maintenance, and data review Rain gauge, temperature, level

Manage Fouling, Bubbles, And Sediment

CSO monitoring sites are unusually demanding for optical instrumentation. Wastewater solids can coat the sensing window, grease can create persistent optical interference, and organic growth can develop quickly during warm periods. Storm flows may also carry leaves, plastic, grit, and other debris that can damage exposed equipment.

A maintenance plan should define inspection intervals before the station goes live. The interval can then be adjusted using fouling rates observed in the first several events. Routine work may include cleaning the optical window, checking the wiper, inspecting cables and mounting hardware, confirming sensor orientation, and comparing the instrument with a reference standard.

Bubbles deserve special attention because they can cause brief, high-amplitude turbidity spikes. Mounting the sensor away from plunging flow and air entrainment helps, as does reviewing the shape and duration of individual peaks. A storm-related increase that persists across several readings is generally more credible than a single isolated excursion, although short events should not be discarded without examining site hydraulics.

Sediment deposition creates a different problem. If the sensing area becomes buried or sits in a depositional pocket, the recorded signal may represent a local layer rather than the moving water column. A stable frame, appropriate elevation above the bed, and periodic photographs or inspections can reveal whether the physical environment around the sensor has changed.

Interpret The Signal As An Event

A useful CSO detection algorithm begins with a dry-weather baseline. Baseline values should cover different seasons and operating conditions because wastewater characteristics, biological activity, and receiving-water flow can vary throughout the year. A fixed threshold may work at a stable site, but adaptive thresholds based on recent baseline statistics are often more robust.

Event logic can combine several conditions: turbidity above a defined threshold, a sustained increase over a specified duration, rising water level, and rainfall within a preceding time window. Requiring multiple indicators reduces false alarms caused by a passing object, momentary bubbles, or sensor noise. The algorithm should also recognize that an overflow may produce several pulses as a storm intensifies and recedes.

Useful outputs include event start time, peak turbidity, time above threshold, integrated turbidity over the event, and the rate of increase. These measures allow operators to compare storms and identify changes in catchment behavior. A gradual increase may indicate diffuse runoff, while a rapid rise followed by a sharp decline may be associated with a short discharge pulse or changing hydraulic control.

Turbidity should not be converted to pollutant mass without appropriate flow and concentration information. If estimated loading is required, the monitoring program needs a defensible relationship among turbidity, suspended solids, and discharge volume. Laboratory samples collected across low, medium, and high turbidity conditions can improve that relationship and reveal when it stops being reliable.

Combine Measurements For Stronger Evidence

A multi-parameter station provides better event context than turbidity alone. Water level identifies hydraulic response, rainfall explains the weather trigger, and flow supports load calculations. Conductivity, temperature, dissolved oxygen, or fluorescence may help distinguish wastewater influence from sediment-rich stormwater, although each parameter requires local interpretation.

Upstream and downstream comparisons can also improve confidence. If downstream turbidity rises while an upstream reference remains stable, the monitored outfall or tributary becomes a more plausible source. If both stations respond at the same time, the cause may be a broader watershed event. Strategic placement is essential because a reference site affected by another tributary will weaken the comparison.

Groundwater and subsurface monitoring methods offer a related lesson: water-quality signals become more useful when they are interpreted alongside depth, flow paths, and local geology. A groundwater profiling case study demonstrates how vertically resolved measurements can help separate sources that would otherwise appear as one blended signal. CSO programs can apply the same principle by examining spatial and temporal differences rather than relying on a single number.

Data quality flags should be stored with every measurement. Flags may identify cleaning periods, sensor removal, power interruptions, communication failures, out-of-range values, or suspected air interference. Automated systems should preserve raw data while generating a separate processed record, allowing staff to review how an alert or event classification was produced.

Recommendations For A Defensible Program

A practical monitoring program should be designed around the decisions the data must support. Regulatory reporting, overflow notification, maintenance planning, and receiving-water protection may require different sampling locations and levels of redundancy.

Move From Detection To Better Control

Continuous turbidity data can do more than confirm that an overflow happened. Over time, event records can reveal which rainfall patterns produce the largest releases, whether a storage basin is operating as expected, and where sediment or hydraulic restrictions may be increasing risk. The same records can support targeted field investigations and more efficient maintenance.

D & A Instruments’ optical sensing experience is relevant to applications where suspended particles, plume movement, and changing water conditions must be measured in marine and freshwater environments. Product support and current management information are provided through Campbell Scientific, making it possible to align sensor selection, deployment, and data handling with the needs of a specific CSO site.

Begin with a site assessment, define the event evidence required, and select a monitoring arrangement that can withstand real storm conditions. A well-maintained optical station, supported by complementary measurements and documented verification, can turn short-lived overflow signals into reliable information for protecting receiving waters and improving sewer-system management.