Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Using optical sensors to detect seabed disturbance from trawling

Bottom trawling can lift fine sediment from the seabed and create short-lived plumes that move with tides, currents and wave-driven near-bed flow. These resuspension events may increase turbidity, transport nutrients or contaminants, reduce light penetration, and expose benthic habitats to repeated sediment disturbance. Their duration and footprint vary considerably between a single tow over firm sand and repeated passes across muddy grounds.

Optical water-quality instruments provide a practical way to observe these changes continuously. A turbidity monitor or suspended-solids sensor can detect rapid increases in particles near the seabed, while a well-designed deployment helps distinguish trawling signals from natural background variability. For Australian fisheries, the value of the data lies in connecting sensor records with vessel activity, local hydrodynamics and the characteristics of each seafloor environment.

Why trawling resuspends seabed sediment

A trawl door, ground rope, bobbin, chain mat or dredge-like component can disturb the upper layer of sediment as fishing gear moves across the bottom. The disturbance is strongest where the bed contains easily eroded silt, clay or fine sand. Coarser sand may settle quickly, while cohesive mud can form a plume that remains suspended and travels well beyond the gear track.

The resulting event usually has a recognisable sequence. Turbidity rises as the gear approaches or passes the sensor, reaches a peak when the disturbed material is closest, and then declines as particles settle or are advected away. A second peak can occur when the plume returns on a reversing tide or when another tow crosses the monitoring area. Current speed, bottom roughness, water depth and stratification all influence this pattern.

The environmental meaning of a plume depends on its composition as much as its concentration. Fine particles can carry organic matter or attached contaminants, while a brief increase in suspended solids may have little lasting effect in a naturally energetic setting. In a quiet estuary, repeated disturbance can have a very different consequence. This is why a reliable baseline is essential before interpreting individual turbidity spikes.

How optical sensors see suspended material

Optical turbidity sensors emit light into the water and measure the light scattered or attenuated by particles. The response is commonly reported in nephelometric turbidity units, although the instrument’s raw output may be converted to suspended-solids concentration after site-specific calibration. Optical backscatter sensors are especially useful for detecting changes close to the seabed, where a trawl plume is often most concentrated.

A turbidity value is not a universal measurement of mass. Particle size, shape, colour, mineralogy and organic content affect the amount of light returned to the detector. A sensor calibrated with clear-water standards may be excellent for repeatable relative measurements but still produce a poor estimate of milligrams per litre in a new location. Collecting water samples during low, moderate and high readings allows laboratory suspended-solids results to be paired with the optical signal.

Sensor selection should match the expected conditions. A compact single-point monitor may suit a shallow deployment, while a profiling system can show how a plume moves through the water column. Dual-wavelength or multi-angle optical designs can provide additional information where particle characteristics change. In very turbid water, automatic gain control, suitable optical path length and anti-fouling measures help preserve a usable signal.

D & A Instruments’ technical FAQs are useful when checking terminology, operating principles and product support arrangements. Current product-management information is provided through Campbell Scientific, which is relevant when an Australian project needs replacement parts, configuration advice or a formal supply pathway.

Designing a field deployment in Australian waters

The deployment should begin with the question the monitoring programme must answer. If the aim is to identify whether a trawl passed a fixed location, a near-bed sensor with accurate time synchronisation may be sufficient. If the objective is to estimate plume extent, several stations or a mobile transect are more appropriate. For ecological assessment, the design may need simultaneous measurements of light, current velocity, depth, salinity and dissolved oxygen.

Australian coastal conditions can change rapidly across regions. Prawn trawling in Queensland waters near the Great Barrier Reef may be affected by monsoonal rainfall, river discharge and strong tidal exchanges. A project in Moreton Bay faces different vessel traffic, estuarine inputs and urban influences. In South Australia’s Spencer Gulf, shallow embayments and fine sediments can produce a distinctive background signal, while northern Australian sites may require wet-season planning around cyclones and access limitations.

A robust station normally includes a turbidity or suspended-solids sensor mounted above the bed, with the height selected to capture the plume without allowing the instrument to sit directly in the gear path. The frame should be stable, clearly marked and recoverable in low visibility. A sacrificial release, acoustic release or protected mooring may be necessary where commercial fishing activity makes surface recovery risky.

Timing matters as much as hardware. Record local time, depth and position with every observation, and synchronise the sensor clock with vessel tracking, fishing logs and current-meter data. In Australia, vessel monitoring system information and fishery logbooks may be controlled by a Commonwealth or state management agency, so data access should be agreed before fieldwork starts. Sampling around neap and spring tides can reveal whether the apparent trawling signal is actually part of a broader tidal cycle.

Separating fishing signals from natural variability

Continuous logging reveals the background against which a resuspension event must be judged. Rainfall, flood plumes, wind waves, ship wakes, anchoring and natural bedforms can all increase turbidity. A nearby reference station outside the trawling footprint is particularly valuable because it records regional changes that should not be attributed to fishing activity.

Event detection can use a combination of thresholds, rate-of-change tests and duration rules. For example, an event might be flagged when turbidity rises above a baseline percentile for a defined period and coincides with a vessel track within a specified distance. The threshold should be based on local observations rather than a generic number. A rolling median, robust percentile range or paired control site can help account for slow changes in fouling and seasonal water quality.

A single sensor trace rarely proves causation. Strong evidence comes from several independent observations: a vessel moving at trawling speed, a rise in near-bed optical backscatter, current direction consistent with plume transport, and a corresponding change at a downstream station. The time lag between stations can be compared with measured current velocity to test whether the same sediment cloud travelled between them.

Data quality checks should identify fouling, wiper cycles, biofouling growth, bubbles, sensor burial and battery-related dropouts. Sudden impossible values, repeated flat lines or high readings during recovery may need to be excluded. Any exclusions should be documented with a reason and timestamp. Where possible, retain the raw signal as well as cleaned turbidity and calculated suspended-solids data so the analysis remains auditable.

For projects involving ports, marine construction or environmental approvals, the same principles apply to monitoring design. The published monitoring programme guidance provides a useful reference for baseline periods, station placement, trigger levels and response procedures, even when the disturbance source is fishing gear rather than construction equipment.

Building a defensible monitoring record

Calibration should reflect the actual sediment found at the site. Collect discrete water samples across the full optical range observed during the study, including calm background conditions and the strongest expected plume. Filter, dry and weigh the suspended fraction using a consistent laboratory method, then assess the relationship between instrument output and measured solids. A single straight-line conversion may be adequate over a limited range, but a segmented or nonlinear relationship can be more realistic for mixed particle populations.

The deployment record should include sensor model, serial number, firmware, calibration date, mounting height, sampling interval, time zone and maintenance history. Record the seabed type, water depth and any changes to the frame between visits. Australian field teams often work from small vessels and compressed tide windows, so a short checklist prevents practical details—such as clock drift or a blocked optical window—from undermining months of observations.

Results are easier to interpret when reported in both concentration and event terms. Useful outputs include the number of detected plumes, peak turbidity, integrated exposure above baseline, event duration, estimated travel distance and recovery time. Mapping the events against tow tracks can show whether disturbance is concentrated along particular grounds or whether the plume spreads into nearby habitat.

Communication also needs to suit the local regulatory and commercial setting. Fisheries managers may need concise evidence about frequency and spatial extent, while researchers may require the complete time series and calibration uncertainty. Operators, port authorities and Traditional Owner organisations may have important knowledge about seasonal activity, local currents and sensitive places. Clear data governance supports collaboration without treating a sensor reading as a stand-alone verdict.

Practical recommendations for reliable deployments

A monitoring programme works best when the optical measurement is treated as part of an observing system rather than as an isolated instrument. Pairing turbidity with current velocity, depth and vessel-position data improves event attribution. Pairing it with water samples improves the interpretation of suspended-solids concentration. Pairing it with a reference station helps separate fishing impacts from rainfall, tides and regional sediment movement.

Field planning should allow for the realities of Australian operations: long distances to remote grounds, limited vessel time, marine growth in warm water, and weather delays. If a crew says the gear must be recovered before the arvo sea breeze arrives, that operational constraint belongs in the deployment plan. A sensor that cannot be safely serviced or recovered will produce a weaker record than a simpler system placed where the field team can maintain it consistently.

With these controls in place, optical monitoring can reveal when seabed material is lifted, how long it remains suspended and where the plume travels. The resulting evidence is more useful for Australian marine science and fisheries management because it connects particle measurements with real fishing activity, local hydrodynamics and the practical conditions of working at sea.