Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. Interpreting turbidity time series during storm eventsStorms turn a relatively stable water-quality record into a fast-moving account of erosion, runoff, transport and deposition. A turbidity sensor may register a…
  2. Choosing anti-biofouling protection for long-term turbidity loggingLong-term turbidity logging is rarely limited by the optical measurement itself. In rivers, estuaries, reservoirs and coastal waters, algae, bacteria, silt and…
  3. Calibrating optical groundwater profilers in variable water chemistryGroundwater rarely presents a chemically uniform target for an optical instrument. A profiler may move from fresh recharge to mineralised water, encounter a…
  4. Deploying Turbidity Sensors Over Shallow Sandy BedsBest practices for deploying turbidity sensors in shallow, high-sand-bed environments begin with understanding that the bed is part of the measurement system.…
  5. Tracking flocculation dynamics in estuarine turbidity maximaEstuarine turbidity maxima are zones where suspended sediment concentrations remain unusually high because river discharge, tidal pumping, salinity-driven…
  6. Groundwater profiler applications for assessing hyporheic exchangeThe hyporheic zone is the active boundary beneath and beside a river where surface water and groundwater mix through sediment. Water may enter the riverbed,…
  7. Integrating Optical Backscatter Sensors Into Watershed TelemetryWatershed monitoring in Australia often depends on instruments installed far from laboratories, mains power and reliable mobile coverage. An optical…
  8. Choosing the right turbidity or suspended-solids sensorWater-quality monitoring often begins with a simple decision: should the project measure turbidity, suspended solids, or both? The answer depends on what the…
  9. Optical sensor drift detection in water quality monitoringOptical instruments used for turbidity and suspended-solids monitoring can deliver stable data for months, then gradually begin to report a biased result. The…
  10. How Suspended-Solids Sensors Guide Dredged Material PlacementDredging creates a moving water-quality problem. Excavation loosens sediment, transport carries it away from the work face, and placement can release a plume…