Notice: file_put_contents(): Write of 464 bytes failed with errno=28 No space left on device in /www/index.php on line 841

Warning: Cannot modify header information - headers already sent by (output started at /www/index.php:841) in /www/index.php on line 798
Blog - 12
Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. Monitoring turbidity downstream of a hydropower dam during flushing eventsFlushing a hydropower reservoir can restore storage capacity, clear deposited sediment from near-intake areas, and improve the long-term operation of a dam. It…
  2. Deploying Groundwater Profilers in Intertidal ZonesSubmarine groundwater discharge (SGD) is the movement of groundwater from the seabed or shoreline into coastal water. It can carry freshwater, dissolved…
  3. How Salinity Affects Optical Turbidity Sensor CalibrationOptical turbidity sensors are often deployed across water bodies where dissolved salts, suspended particles, temperature, and biological activity change over…
  4. Optical Backscatter for Sediment Estimates in Retention PondsStormwater retention ponds capture runoff, slow drainage, and allow suspended particles to settle before water leaves a developed site. That same settling…
  5. Turbidity Sensor Cross-Calibration Across Instrument ModelsTurbidity sensors from different manufacturers, product families, or production generations can report different values while observing the same water. This…
  6. How to Determine Optimal Sampling Frequency for Turbidity in Flashy StreamsFlashy streams can shift from clear, low-flow conditions to sediment-laden torrents within minutes. A turbidity monitoring program that samples too slowly may…
  7. Groundwater Profiling for Managed Aquifer Recharge MonitoringManaged aquifer recharge (MAR) basins are designed to move surface water into an aquifer through engineered infiltration. Their value depends on what happens…
  8. Effects Of Air Bubbles On Submersible Turbidity MeasurementsSubmersible turbidity sensors provide valuable continuous data in rivers, reservoirs, coastal waters, dredging zones, and treatment facilities. Their optical…
  9. Standard Procedures for Optical Sensors on Buoy PlatformsOptical sensors mounted on buoys provide continuous measurements of turbidity, suspended solids, sediment plumes, and related water-quality conditions. They…
  10. Selecting turbidity sensors for freshwater and marine environmentsTurbidity monitoring looks simple until a sensor is moved between rivers, lakes, estuaries, coastal waters, and active dredging zones. The same optical…