Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. Groundwater profiler applications in agricultural tile drainage studiesAgricultural tile drainage helps remove excess water from fields, improve trafficability, and extend the workable planting window. It can also accelerate the…
  2. Deploying Multi-Depth Turbidity Arrays in Stratified EstuariesEstuaries are dynamic measurement environments where freshwater inflow, tidal exchange, wind, bathymetry, and sediment transport interact within a relatively…
  3. Techniques for Reducing Flow-Induced Noise in In-Situ Turbidity MeasurementsIn-situ turbidity sensors provide continuous information about suspended particles in rivers, channels, reservoirs, estuaries, and coastal waters. Their value…
  4. Comparing Discrete And Continuous Turbidity Sampling For Stormwater ComplianceStormwater compliance monitoring often begins with a practical question: should a site collect individual water samples at selected times, or should it measure…
  5. Adapting Optical Backscatter Sensors for Mining Tailings SlurriesMining tailings streams are among the most demanding environments for optical water-quality instrumentation. The fluid may contain a dense mixture of finely…
  6. Selecting Turbidity Sensors for Deep Ocean ExplorationDeep-ocean exploration places unusual demands on water-quality instrumentation. A turbidity sensor must measure suspended particles in darkness, tolerate high…
  7. Groundwater Profiling for Detecting Landfill Leachate PlumesLandfill leachate forms when rainwater and groundwater move through waste and dissolve or carry contaminants into the surrounding subsurface. The resulting…
  8. Accounting for Nonlinear Response in High-Range Turbidity MeasurementsTurbidity instruments are often easiest to understand near the middle of their working range. At low concentrations, a small increase in suspended material can…
  9. Using Suspended-Solids Sensors to Measure Hydrocyclone EfficiencyHydrocyclones separate particles from water by using centrifugal force. Feed slurry enters tangentially, creating a vortex that drives denser or coarser solids…
  10. Optical Sensor Cleaning Regimes for Biofouling Control in Nutrient-Rich WatersNutrient-rich rivers, estuaries, reservoirs, and coastal waters can produce excellent conditions for algae, bacteria, fungi, and organic deposits. Those…