Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. Comparing Optical Backscatter and Nephelometric Turbidity Sensors in the FieldField turbidity monitoring often begins with a simple requirement: detect how much suspended material is present in water. The measurement becomes more complex…
  2. The Future Of Optical Sensing In Water MonitoringOptical sensing is becoming smaller, smarter, and more adaptable to the way water-quality data is collected. Improvements in emitters, photodetectors, signal…
  3. Suspended-Solids Monitoring In The Paper And Pulp IndustryPaper and pulp production depends on large volumes of water for pulping, washing, bleaching, paper formation, cooling, and cleaning. Each stage can carry…
  4. Troubleshooting a Turbidity Sensor That Reads Zero or MaximumA turbidity sensor that suddenly reports zero, full scale, or an implausibly steady value is usually signaling a problem somewhere in the measurement chain.…
  5. Turbidity Monitoring In Brackish Water With Salinity CompensationBrackish water occupies the shifting boundary between freshwater and the sea. Estuaries, tidal rivers, lagoons, coastal wetlands, dredging areas, and…
  6. Optical Sensor User Training for Accurate Water-Quality DataReliable optical measurements begin long before a sensor enters the water. The quality of a turbidity, suspended-solids, or sediment-monitoring dataset depends…
  7. Integrating turbidity monitors with weather stations for complete water monitoringWater quality rarely changes in isolation. A rainfall event can wash soil, road sediment, and organic material into a stream, while wind can resuspend…
  8. Groundwater Profiling Reveals a Leachate Migration PathLandfill leachate can move through groundwater in a pattern that is difficult to reconstruct from a few permanent monitoring wells. Its composition changes…
  9. Understanding In-Situ and Laboratory Turbidity MeasurementsTurbidity is a widely used indicator of suspended material in water, yet the number reported by an instrument depends strongly on where, when, and how the…
  10. Deploying a Chain of Turbidity Sensors for Plume TrackingA chain of turbidity sensors provides a practical way to observe how suspended sediment moves through the water column. Instead of relying on a single reading…