Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. The Evolution of Optical Sensor Technology in HydrologyHydrology has always depended on indirect evidence. Water level, flow velocity, sediment transport, and water clarity reveal how rivers, lakes, wetlands,…
  2. Turbidity Monitoring in Flood Events: Rapid Response and Data CollectionFloods can transform a clear stream into a fast-moving mixture of water, clay, organic matter, sand, and debris within minutes. This rapid change affects…
  3. Power management for optical sensors in long-term autonomous deploymentsLong-term water-quality monitoring depends on much more than selecting a sensor with the right measurement range. An optical turbidity monitor or…
  4. How to Correlate Turbidity with Total Suspended Solids Using RegressionTurbidity and total suspended solids (TSS) are closely related water-quality measurements, but they are not interchangeable. Turbidity describes how strongly…
  5. Groundwater Profiling for Saltwater Intrusion DetectionSaltwater intrusion occurs when saline water moves into freshwater aquifers, often because groundwater pumping lowers hydraulic pressure near a coastline.…
  6. Choosing turbidity sensors for ice-covered lakes and riversWinter changes the conditions under which water-quality instruments operate. Ice can block light, trap bubbles beneath the surface, alter flow patterns, and…
  7. Bubble Interference in Optical Turbidity ReadingsOptical turbidity instruments estimate the concentration of suspended particles by measuring how particles scatter or absorb light in water. The method is…
  8. How to Use Suspended-Solids Sensors for Real-Time Process ControlA suspended-solids sensor provides a continuous indication of particulate concentration in water, slurry, or another liquid stream. When its signal is…
  9. Troubleshooting Optical Sensor Fouling in High-Productivity WatersHigh-productivity waters contain abundant biological material, organic particles, and suspended sediment. These conditions support aquatic life and often…
  10. Turbidity Monitoring For A Submarine Pipeline InstallationInstalling a submarine pipeline can disturb seabed sediment over a wide area, especially when the route crosses fine silt, estuarine deposits, or recently…