Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. Sensor communication protocols for subsea turbidity monitoringReliable data transfer begins inside a pressure housing, where an optical turbidity sensor must communicate through a wet-mate connector, penetrator, cable,…
  2. Optical Monitoring of Sediment Resuspension During Tidal Flat DredgingDredging across an intertidal flat can release a short-lived but highly mobile plume of fine sediment. Tides then move that plume through shallow channels,…
  3. Linking turbidity sensors and ADCPs in real time for sediment studiesEstuarine and coastal sediment studies along the Australian coastline have shifted sharply toward continuous, real-time monitoring over the past decade.…
  4. Choosing Optical Path Length for Turbidity Sensor ApplicationsSelecting an optical path length is one of the most important decisions when specifying a turbidity sensor. The path length is the distance light travels…
  5. Groundwater Thermal Plume Mapping at Australian Power PlantsSubsurface thermal plumes can form where groundwater picks up heat from power-station infrastructure, interacts with buried pipes, or follows fractures and…
  6. Suspended-solids sensor mooring in Australian riversDeploying suspended-solids sensors in high-flow rivers requires a mooring that keeps the optical head in representative water while surviving current,…
  7. Copper-Alloy Sensor Windows and the Long Battle Against Marine BiofoulingOptical instrumentation dropped into estuaries, harbours, and reef waters spends its working life fighting a quiet war against colonisation. Bacteria,…
  8. Calibrating Turbidity Sensors: Formazin vs Natural Sediment StandardsOptical turbidity sensors are used across Australian water-quality programs, from reef monitoring off Cairns to sediment-load studies in the Murray-Darling…
  9. Using Groundwater Profilers to Trace Landfill Leachate PlumesLandfill leachate is a liquid formed when rainwater and other moisture move through waste, dissolve soluble compounds and carry fine particles into the…
  10. Optical Suspended-Solids Monitoring for TMDL ComplianceA turbidity limit can look simple in a permit: keep a discharge below a specified threshold, report exceedances, and demonstrate that receiving-water quality…