Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. Monitoring a Pipeline Leak in Pilbara GroundwaterA small pipeline leak can look like a routine maintenance issue until petroleum hydrocarbons enter an aquifer and start moving with the groundwater. A surface…
  2. Deploying Optical Sensors Through Ice-Covered LakesWinter fieldwork on an ice-covered lake demands more than lowering an instrument through a hole and recording readings. Ice thickness, snow cover, wind,…
  3. Zero-Calibration Checks for Optical Turbidity SensorsOptical turbidity sensors measure light scattered by suspended particles to provide a rapid indication of water clarity. Applications include dredging-plume…
  4. Sensor validation of ship-induced sediment resuspension modelsUsing suspended-solids sensors to validate numerical models of ship-induced sediment resuspension turns a simulated sediment plume into a testable field…
  5. Automated sponge wipers for optical sensorsOptical turbidity monitors and suspended-solids sensors offer a practical way to track changing water conditions, but their strength depends on a clean optical…
  6. Groundwater profiler logging in permafrost and alpine zonesA groundwater profiler creates a depth-referenced record of borehole conditions instead of relying on a single sample at the pump outlet. Paired temperature…
  7. Salinity Effects on Submersible Turbidity SensorsSubmersible turbidity sensors estimate suspended-particle concentration from light scattered or attenuated in water. Outputs commonly appear as nephelometric…
  8. Case study: optical sensors for beach nourishment sediment plumesThis case study examines using optical turbidity sensors to monitor sediment plumes from beach nourishment projects. The representative Australian deployment…
  9. 90-degree scatter vs 180-degree backscatter for freshwater turbidityFreshwater turbidity monitoring often comes down to a choice between 90-degree scatter and 180-degree backscatter. Both methods send light into water and…
  10. Synchronise optical sensors for wireless spatial plume mappingSpatial plume mapping depends on comparing turbidity and suspended-solids readings from several locations at the same moment. To synchronise multiple optical…