Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. Selecting Reliable Turbidity Sensors for Hypersaline WaterHypersaline environments place unusual demands on turbidity monitoring equipment. Water with a very high dissolved-salt concentration can affect optical…
  2. Using Optical Backscatter to Estimate Bedload Transport in RiversBedload transport is the movement of sediment along or very close to a riverbed. Sand, gravel, and small cobbles may roll, slide, or bounce under the force of…
  3. Groundwater Profiler Data Quality Control For Reliable MeasurementsGroundwater profilers reveal how temperature, conductivity, turbidity, dissolved constituents, and suspended material change with depth. That vertical detail…
  4. Calibrating a suspended-solids sensor with site-specific sedimentA suspended-solids sensor estimates the concentration of particles in water by measuring how those particles interact with light. The instrument may report an…
  5. Reading Tidal-Flat Sediment Movement Through Optical MonitoringTidal flats can look calm from the shoreline while carrying large amounts of sediment through shallow channels, pools, and exposed intertidal surfaces. Each…
  6. Temperature Effects in Optical Turbidity MonitoringOptical turbidity instruments estimate water clarity by measuring how suspended particles scatter or absorb light. The resulting signal is commonly reported in…
  7. Deploying Turbidity Sensors From Small Unmanned Surface VesselsSmall unmanned surface vessels (USVs) give environmental teams a practical way to measure water quality across shallow, hazardous, or difficult-to-access…
  8. Data Archival and Metadata Standards for Long-Term Water Quality MonitoringLong-term water-quality programs generate far more than streams of turbidity, suspended-solids, temperature, or conductivity values. They produce a record of…
  9. Optical Sensor Response to Mixed Clay And Sand SuspensionsWater containing suspended clay and sand can produce a turbidity signal that is difficult to interpret with a single calibration or a simple assumption about…
  10. Using Groundwater Profilers to Assess Aquifer HeterogeneityAquifers are rarely uniform bodies of sand, gravel, or fractured rock. Layers with different grain sizes, permeability, porosity, chemistry, and recharge…