Turbidity & suspended solids instrumentation, historically based in Port Townsend, WA Product line now supported through Campbell Scientific, Inc.
A bold yellow angular logo mark set against a deep dark background, sharp and modern
D & A Instruments
Turbidity monitors & water-quality instrumentation

Blog

  1. Converting FTU and NTU Across Turbidity StandardsTurbidity data can look deceptively simple: a number followed by FTU or NTU. In practice, the value reflects a combination of calibration material, optical…
  2. Using optical sensors to detect seabed disturbance from trawlingBottom trawling can lift fine sediment from the seabed and create short-lived plumes that move with tides, currents and wave-driven near-bed flow. These…
  3. Sensor orientation and suspended-solids measurements in flowing waterSuspended-solids monitoring is often treated as a sensor-selection problem, yet installation geometry can be just as influential as the instrument itself. The…
  4. Mapping the Salt-Fresh Boundary Beneath Island Aquifers with Optical Profiler DeploymentCoastal aquifers on tropical and subtropical islands store the freshwater that sustains local communities, agriculture, and tourism economies. Where these…
  5. Fixing Erratic Turbidity Readings Caused by Air Bubbles in SensorsAir bubbles are the quiet saboteurs of optical turbidity monitoring. Whether a probe sits on a pontoon in Sydney Harbour, hangs from a frame in a Tasmanian…
  6. Multi-point optical arrays for dredge plume monitoringWhen a trailing suction hopper dredger pumps saturated sediment overboard during overflow operations, the resulting suspended sediment cloud can travel…
  7. Optical Sensor Response to Calcite, Clay, and Quartz SuspensionsOptical turbidity and suspended-solids sensors have become indispensable for water-quality programs across Australia, where rivers, estuaries, and coastal…
  8. Winterizing suspended-solids sensors for ice-covered riversAustralia may not be the first country that springs to mind when ice-covered rivers are mentioned, yet Australian scientists, instrument vendors and…
  9. Building a Low-Cost Turbidity Sensor Validation Chamber for Field UseField turbidity work in Australia rarely resembles the calm conditions of a laboratory bench. A crew might load a ute in Adelaide one morning, drive across the…
  10. Estimating phosphorus loads with optical turbidity in farm runoffAustralian growers, agronomists, and water-quality officers are increasingly asked to quantify how much phosphorus leaves a paddock when rain falls on bare…